{"id":169066,"date":"2024-06-27T16:47:43","date_gmt":"2024-06-27T07:47:43","guid":{"rendered":"https:\/\/www.nopgroup.com\/?post_type=product&p=169066"},"modified":"2024-12-10T15:52:32","modified_gmt":"2024-12-10T06:52:32","slug":"eis","status":"publish","type":"product","link":"https:\/\/www.nopgroup.com\/en\/product\/eis\/","title":{"rendered":"EIS Indexing motor series"},"content":{"rendered":"\n

To adjust initial setting<\/h3>\n\n\n\n
Symptom case<\/th>Adjust setting if below symptom happens<\/td><\/tr>
When motor stops, shock is detected. \uff08Revolution speed is not reduced\uff09<\/th>Turn counter-clockwise<\/td><\/tr>
After motor stops beyond the designated point, motor back to there.<\/th>Turn counter-clockwise<\/td><\/tr>
Motor doesn’t reach to the designated point.<\/th>Turn clockwise<\/td><\/tr>
After revolution speed is reduced, motor runs slowly then reach to the designated point.<\/th>Turn clockwise<\/td><\/tr><\/tbody><\/table>
\u203bThe combination with reducer enables more precise indexing.<\/figcaption><\/figure>\n\n\n\n

How to adjust initial setting<\/strong><\/h4>\n\n\n\n
\n
\n
    \n
  • 1: Loose bearing nut (34mm) mounted in mechanical valve sleeve then remove it.<\/li>\n\n\n\n
  • 2: Grab mechanical valve sleeve by hand tool like spanner then turn sleeve by 90 degrees, and fix it when the suitable position is found.<\/li>\n\n\n\n
  • 3: Tighten bearing nut by hand tool.<\/li>\n\n\n\n
  • 4: Conditions when motor stops do NOT seem to be good during process 2, change the gain.<\/li>\n<\/ul>\n<\/div>\n\n\n\n
    \n
    \"\"
    Caution: Adjusting sleeve beyond above range may cause the trouble in O-ring then come to oil-leak.<\/figcaption><\/figure>\n<\/div>\n<\/div>\n\n\n\n

    Motor specifications<\/h2>\n\n\n\n

    \u25cb Rated pressure: 7.0MPa \u25cb Rated flow rate: 20L\/min \u3000\u25cb Permissible back pressure: 0.98MPa\u3000\u25cb Indexed number: 1, 2, 3 \u25cb Repeated indexing accuracy: within \u00b10.1\u00b0 \u25cb Solenoid valve voltage: AC100V 50\/60Hz \u25cb Permissible hydraulic oil: ISO VG32\uff5e56 \u25cb Recommended oil temperature: 0\uff5e50\u2103<\/p>\n\n\n\n

    Product
    <\/th>    		EIS-07<\/th>EIS-100<\/th>EIS-120<\/th>EIS-160<\/th>EIS-170<\/th>EIS-190<\/th>EIS-240<\/th>EIS-280<\/th>EIS-380<\/th><\/tr>
    Motor capacity\/cm3\/rev<\/th>71<\/td>98<\/td>118<\/td>162<\/td>171<\/td>188<\/td>235<\/td>282<\/td>376<\/td><\/tr>
    Max. load(N\u30fbm2<\/sup>)<\/th>10<\/td>20<\/td>30<\/td>45<\/td>50<\/td>60<\/td>75<\/td>95<\/td>135<\/td><\/tr>
    Indexed number(P\/rev)<\/th>1<\/td>2<\/td>3<\/td>1<\/td>2<\/td>3<\/td>1<\/td>2<\/td>3<\/td>1<\/td>2<\/td>3<\/td>1<\/td>2<\/td>3<\/td>1<\/td>2<\/td>3<\/td>1<\/td>2<\/td>3<\/td>1<\/td>2<\/td>3<\/td>1<\/td>2<\/td>3<\/td><\/tr>
    Standard revolution(rpm)<\/th>130<\/td>190<\/td>130<\/td>100<\/td>120<\/td>70<\/td>110<\/td>80<\/td>100<\/td>70<\/td>100<\/td>60<\/td>80<\/td>50<\/td>70<\/td>40<\/td>50<\/td>30<\/td><\/tr>
    Required
    oil
    volume(\u2113\/min)<\/th>    		10<\/td>7<\/td>14<\/td>11<\/td>16<\/td>9<\/td>20<\/td>14<\/td>19<\/td>13<\/td>20<\/td>13<\/td>20<\/td>13<\/td>21<\/td>13<\/td>21<\/td>13<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

    Solenoid valve specs. (Direction set valve, Pilot valve)<\/h2>\n\n\n\n
    Rated voltage<\/th>AC100V\/50,60Hz<\/td><\/tr>
    Applicable voltage<\/th>90\uff5e110V\/50Hz, 90\uff5e120V\/60Hz<\/td><\/tr><\/tbody><\/table>
    \uff0aDC power type is available, contact to NOP customer service if you aim to inquire.<\/figcaption><\/figure>\n","protected":false},"featured_media":178783,"parent":0,"template":"","all_category":[186],"class_list":["post-169066","product","type-product","status-publish","has-post-thumbnail","hentry","all_category-186","en-US"],"_links":{"self":[{"href":"https:\/\/www.nopgroup.com\/wp-json\/wp\/v2\/product\/169066","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.nopgroup.com\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.nopgroup.com\/wp-json\/wp\/v2\/types\/product"}],"version-history":[{"count":39,"href":"https:\/\/www.nopgroup.com\/wp-json\/wp\/v2\/product\/169066\/revisions"}],"predecessor-version":[{"id":178785,"href":"https:\/\/www.nopgroup.com\/wp-json\/wp\/v2\/product\/169066\/revisions\/178785"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.nopgroup.com\/wp-json\/wp\/v2\/media\/178783"}],"wp:attachment":[{"href":"https:\/\/www.nopgroup.com\/wp-json\/wp\/v2\/media?parent=169066"}],"wp:term":[{"taxonomy":"all_category","embeddable":true,"href":"https:\/\/www.nopgroup.com\/wp-json\/wp\/v2\/all_category?post=169066"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}