1ME |
 |
A practical gear pump where anyone is able replace parts simply without removing any the pump's main components.
Features
- Due to the back pull-out design, the machine time has been drastically reduced compared to existing pumps.
- Due to the use of heavy duty ball bearings, a long operating life is possible.
- Compatible with wide variety of fluids.
- Able to be exchanged with existing gear pumps.
Specifications
- Cast Iron
| Model |
MAX. RPM |
Flow rate |
| LPM |
LPH |
RPM |
| GG015 |
1800 |
56.8 |
3,408 |
1750 |
| GG030 |
1800 |
113.5 |
6,810 |
1750 |
| GG050 |
1500 |
143.8 |
8,628 |
1150 |
| GG070 |
1500 |
189.2 |
11,352 |
1150 |
| GG080 |
1500 |
227.1 |
13,626 |
1150 |
| GG090 |
1500 |
283.8 |
17,028 |
1150 |
| GG120 |
1200 |
283.8 |
17,028 |
780 |
| GG130 |
1000 |
378.5 |
22,710 |
780 |
| GG200 |
1000 |
510.9 |
30,654 |
640 |
| GG210 |
800 |
529.9 |
31,794 |
520 |
| Pressures to | 1.379MPa (200PSI) |
| Temperatures to | 316°C (600F) |
| Viscosities to | 220,000cSt (1,000,000SSU) |
- Stainless Steel
| Model |
MAX. RPM |
Flow rate |
| (RPM) |
LPM |
LPH |
RPM |
| GG015 |
1200 |
37.8 |
2,271 |
1150 |
| GG030 |
1200 |
75.7 |
4,542 |
1150 |
| GG050 |
1000 |
94.6 |
5,676 |
780 |
| GG070 |
1000 |
132.4 |
7,944 |
780 |
| GG080 |
1000 |
151.4 |
9,084 |
780 |
| GG090 |
1000 |
189.2 |
11,352 |
780 |
| GG120 |
800 |
189.2 |
11,352 |
520 |
| GG130 |
640 |
246 |
14,760 |
520 |
| GG200 |
640 |
340.6 |
20,436 |
420 |
| GG210 |
520 |
415.2 |
24,912 |
420 |
|
|
Maximum Speeds
Faster top speeds allow increased flow rate if needs change.
Modular Seal Chamber
Modular seal chamber provides a choice of packing, mechanical seal or cartridge seal without changing major pump components.
|
Modular Ports
Several port styles are available to match your piping needs:
- Side-Side or Side-Top port positions
- NPT tapped
- BSPT tapped
- ANSI 125#/150# flanged
- ANSI 250#/300# flanged
- ISO PN16 flanged
- ISO PN40 flanged
Each pump size has numerous port size choices to minimize piping losses.
For example, GG200 size offers these choices:
- 2" or 50mm
- 2 1/2" or 65mm
- 3" or 80mm
- 4" or 100mm
|
|
Standard Shaft Sizes
Standard shaft sizes make you possible to use existing seals for other rotating equipment. In addition, Global Gear pumps in both nominal inch or metric shaft sizes are available, which satisfy the customers allover the world.
|
Spare Drive Modules
The back pull-out design greatly reduces down-time for service-----The pump can be repaired without distributing piping or shaft alignment.
Back Pull-Out
The back pull-out design greatly reduces down-time for service-the pump can be repaired without distributing piping or shaft alignment.
Inline Seal Access
Inline seal access design reduces seal maintenance time-----The seal can be removed without disturbing the piping or shaft alignment.
No Piping Changes
GlobalGear mounting dimensions match those of most other gear pumps.
No Drive Changes
At any given speed, the GlobalGear's flow rates match those of most other gear pumps.
|
|
